Du bestemmer over dine data!

I samarbejde med vores samarbejdspartnere har vi teknologier, som f.eks. Cookies til at indsamle oplysninger, som giver dig en bedre oplevelse.

Vi indsamler forskellige oplysninger om dig til f.eks.:
1. Funktionalitet.
2. Statistik.
3. Markedsføring.

Desto mere viden vi får om dig desto bedre oplevelse kan vi give dig og de er selvfølgelig i sikre hænder hos os.

Du kan læse mere her

Teltonika RUTX50 5G/4G/LTE Trådløs Router Sort

Teltonika RUTX50 5G/4G/LTE Trådløs Router Sort
Teltonika RUTX50 5G/4G/LTE Trådløs Router Sort

RUTX50

INDUSTRIAL 5G ROUTER

RUTX50 is a dual-SIM multi-network router offering 5G mobile communication for high-speed and data-heavy applications. Together with 5x Gigabit Ethernet ports and dual-band Wi-Fi, it provides data connection redundancy with auto-failover. Backward compatibility and multiple interfaces allow for long-term expandability and upgrading options.



Specifikationer:

Mobile

  • Mobile module: 5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2); 4G LTE Cat 20 up to 2.0 Gbps DL/ 200M Mbps UL; 3G up to 42 DL/ 5.76 UL Mbps
  • 3GPP Release: Release 15/16 depending on the hardware version
  • eSIM*: Consumer type eSIM, profile download and removal operations, up to 7 eSIM profiles; does not include data plans
  • SIM switch*: Dual SIM and eSIM, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
  • Status: IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
  • SMS: SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
  • USSD: Supports sending and reading Unstructured Supplementary Service Data messages
  • Block/Allow list: Operator block/allow list (by country or separate operators)
  • Multiple PDN: Possibility to use different PDNs for multiple network access and services
  • Band management: Band lock, Used band status display
  • SIM idle protection service: Provides the possibility to configure the router to periodically switch to the unused SIM card and establish a data connection in order to prevent the SIM card from being blocked
  • SIM PIN code management: SIM PIN code management enables setting, changing, or disabling the SIM card's PIN
  • APN: Auto APN
  • Bridge: Direct connection (bridge) between mobile ISP and device on LAN
  • Passthrough: Router assigns its mobile WAN IP address to another device on LAN
  • Framed routing: Framed routing: support an IP network behind 5G UE
  • Wireless

  • Wireless mode: 802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
  • Wi-Fi security: WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
  • SSID/ESSID: SSID stealth mode and access control based on MAC address
  • Wi-Fi users: Up to 150 simultaneous connections
  • Wireless Connectivity Features: Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
  • Wireless MAC filter: Allowlist, blocklist
  • Wireless QR code generator: Once scanned, a user will automatically enter your network without needing to input login information
  • TravelMate: Forward Wi-Fi hotspot landing page to a subsequent connected device
  • Ethernet

  • WAN: 1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
  • LAN: 4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
  • VPN

  • OpenVPN: Multiple clients and a server can run simultaneously, 27 encryption methods
  • OpenVPN Encryption
  • DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,
  • BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
  • IPsec: XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
  • GRE: GRE tunnel, GRE tunnel over IPsec support
  • PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
  • Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
  • DMVPN: Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support
  • SSTP: SSTP client instance support
  • ZeroTier: ZeroTier VPN client support
  • WireGuard: WireGuard VPN client and server support
  • Tinc: Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.
  • Tailscale: Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol
  • OPC UA

  • Supported modes: Client, Server
  • Supported connection types: TCP
  • DATA TO SERVER

  • Protocol: HTTP(S), MQTT, Azure MQTT
  • Data to server: Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature
  • MQTT Gateway

  • Modbus MQTT Gateway: Allows sending commands and receiving data from MODBUS Server through MQTT broker
  • DNP3

  • Supported modes: Station, Outstation
  • Supported connection: TCP, USB
  • DLMS/COSEM

  • DLMS Support: DLMS - standard protocol for utility meter data exchange
  • Supported modes: Client
  • Supported connection types: TCP, USB
  • System Characteristics

  • CPU: Quad-core ARM Cortex A7, 717 MHz
  • RAM: 256 MB
  • FLASH storage: 256 MB
  • Firmware / Configuration

  • WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup
  • FOTA: Update FW
  • RMS: Update FW/configuration for multiple devices at once
  • Keep settings: Update FW without losing current configuration
  • Factory settings reset: A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration
  • Location Tracking

  • GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS
  • Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS
  • NMEA: NMEA 0183
  • NTRIP: NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
  • Server software: Supported server software TAVL, RMS
  • Geofencing: Configurable multiple geofence zones
  • USB

  • Data rate: USB 2.0
  • Applications: Samba share, USB-to-serial
  • External devices: Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter
  • Storage formats: FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4
  • Input / Output

  • Input: 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
  • Output: 1 x Digital Output, Open collector output, max output 30 V, 300 mA
  • Events: Email, RMS, SMS
  • I/O juggler: Allows to set certain I/O conditions to initiate event
  • Power

  • Connector: 4-pin industrial DC power socket
  • Input voltage range: 9 – 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max
  • PoE (passive): Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 50 VDC
  • Power consumption: Idle: < 4 W, Max: < 16.5 W
  • Physical Specification

  • Casing material: Aluminium housing
  • Dimensions (W x H x D): 132 x 44.2 x 95.1 mm
  • Weight: 533 g
  • Mounting options: DIN rail, wall mount, flat surface (all require additional kit)
  • Operating Environment

  • Operating temperature: -40 °C to 75 °C
  • Operating humidity: 10% to 90% non-condensing
  • Ingress Protection Rating: IP30
  • Ovenstående informationer/specifikationer er vejledende og kan uden varsel være ændret af producenten.
    Der tages forbehold for trykfejl og billederne er vejledende.
    Pris ved  1 stk. DKK

     


    Antal
    Køb

    Varenummer 205021250003
    Lagerstatus
    Ikke på lager
    Klik her og få en mail når varen kommer på lager igen
     
    Forventet leveringstid Ubekræftet
    Link til producent: Teltonika IoT
    Teltonika RUTX50 5G/4G/LTE Trådløs Router Sort

    RUTX50

    INDUSTRIAL 5G ROUTER

    RUTX50 is a dual-SIM multi-network router offering 5G mobile communication for high-speed and data-heavy applications. Together with 5x Gigabit Ethernet ports and dual-band Wi-Fi, it provides data connection redundancy with auto-failover. Backward compatibility and multiple interfaces allow for long-term expandability and upgrading options.



    Specifikationer:

    Mobile

  • Mobile module: 5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2); 4G LTE Cat 20 up to 2.0 Gbps DL/ 200M Mbps UL; 3G up to 42 DL/ 5.76 UL Mbps
  • 3GPP Release: Release 15/16 depending on the hardware version
  • eSIM*: Consumer type eSIM, profile download and removal operations, up to 7 eSIM profiles; does not include data plans
  • SIM switch*: Dual SIM and eSIM, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
  • Status: IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
  • SMS: SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
  • USSD: Supports sending and reading Unstructured Supplementary Service Data messages
  • Block/Allow list: Operator block/allow list (by country or separate operators)
  • Multiple PDN: Possibility to use different PDNs for multiple network access and services
  • Band management: Band lock, Used band status display
  • SIM idle protection service: Provides the possibility to configure the router to periodically switch to the unused SIM card and establish a data connection in order to prevent the SIM card from being blocked
  • SIM PIN code management: SIM PIN code management enables setting, changing, or disabling the SIM card's PIN
  • APN: Auto APN
  • Bridge: Direct connection (bridge) between mobile ISP and device on LAN
  • Passthrough: Router assigns its mobile WAN IP address to another device on LAN
  • Framed routing: Framed routing: support an IP network behind 5G UE
  • Wireless

  • Wireless mode: 802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
  • Wi-Fi security: WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
  • SSID/ESSID: SSID stealth mode and access control based on MAC address
  • Wi-Fi users: Up to 150 simultaneous connections
  • Wireless Connectivity Features: Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
  • Wireless MAC filter: Allowlist, blocklist
  • Wireless QR code generator: Once scanned, a user will automatically enter your network without needing to input login information
  • TravelMate: Forward Wi-Fi hotspot landing page to a subsequent connected device
  • Ethernet

  • WAN: 1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
  • LAN: 4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
  • VPN

  • OpenVPN: Multiple clients and a server can run simultaneously, 27 encryption methods
  • OpenVPN Encryption
  • DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,
  • BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
  • IPsec: XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
  • GRE: GRE tunnel, GRE tunnel over IPsec support
  • PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
  • Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
  • DMVPN: Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support
  • SSTP: SSTP client instance support
  • ZeroTier: ZeroTier VPN client support
  • WireGuard: WireGuard VPN client and server support
  • Tinc: Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.
  • Tailscale: Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol
  • OPC UA

  • Supported modes: Client, Server
  • Supported connection types: TCP
  • DATA TO SERVER

  • Protocol: HTTP(S), MQTT, Azure MQTT
  • Data to server: Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature
  • MQTT Gateway

  • Modbus MQTT Gateway: Allows sending commands and receiving data from MODBUS Server through MQTT broker
  • DNP3

  • Supported modes: Station, Outstation
  • Supported connection: TCP, USB
  • DLMS/COSEM

  • DLMS Support: DLMS - standard protocol for utility meter data exchange
  • Supported modes: Client
  • Supported connection types: TCP, USB
  • System Characteristics

  • CPU: Quad-core ARM Cortex A7, 717 MHz
  • RAM: 256 MB
  • FLASH storage: 256 MB
  • Firmware / Configuration

  • WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup
  • FOTA: Update FW
  • RMS: Update FW/configuration for multiple devices at once
  • Keep settings: Update FW without losing current configuration
  • Factory settings reset: A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration
  • Location Tracking

  • GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS
  • Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS
  • NMEA: NMEA 0183
  • NTRIP: NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
  • Server software: Supported server software TAVL, RMS
  • Geofencing: Configurable multiple geofence zones
  • USB

  • Data rate: USB 2.0
  • Applications: Samba share, USB-to-serial
  • External devices: Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter
  • Storage formats: FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4
  • Input / Output

  • Input: 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
  • Output: 1 x Digital Output, Open collector output, max output 30 V, 300 mA
  • Events: Email, RMS, SMS
  • I/O juggler: Allows to set certain I/O conditions to initiate event
  • Power

  • Connector: 4-pin industrial DC power socket
  • Input voltage range: 9 – 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max
  • PoE (passive): Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 50 VDC
  • Power consumption: Idle: < 4 W, Max: < 16.5 W
  • Physical Specification

  • Casing material: Aluminium housing
  • Dimensions (W x H x D): 132 x 44.2 x 95.1 mm
  • Weight: 533 g
  • Mounting options: DIN rail, wall mount, flat surface (all require additional kit)
  • Operating Environment

  • Operating temperature: -40 °C to 75 °C
  • Operating humidity: 10% to 90% non-condensing
  • Ingress Protection Rating: IP30
  • Ovenstående informationer/specifikationer er vejledende og kan uden varsel være ændret af producenten.
    Der tages forbehold for trykfejl og billederne er vejledende.