Du bestemmer over dine data!

I samarbejde med vores samarbejdspartnere har vi teknologier, som f.eks. Cookies til at indsamle oplysninger, som giver dig en bedre oplevelse.

Vi indsamler forskellige oplysninger om dig til f.eks.:
1. Funktionalitet.
2. Statistik.
3. Markedsføring.

Desto mere viden vi får om dig desto bedre oplevelse kan vi give dig og de er selvfølgelig i sikre hænder hos os.

Du kan læse mere her

Teltonika RUT951 LTE Cat 4 Router Black

Teltonika RUT951 LTE Cat 4 Router Black
Teltonika RUT951 LTE Cat 4 Router Black

RUT951

INDUSTRIAL CELLULAR ROUTER

RUT951 features dual-SIM cellular connectivity combined with Wi-Fi and four Ethernet interfaces to meet the needs of the most varied IoT scenarios. Powered by RutOS, this router offers advanced customization options, automation features, and top-level security for your solution.

CONNECTIVITY

  • 4G LTE (Cat 4), 3G, 2G
  • DUAL SIM

  • With auto failover, backup WAN and other switching scenarios
  • WI-FI

  • Wireless Access Point with Hotspot functionality
  • WAN FAILOVER

  • Automatic switch to available backup connection


  • Specifikationer:

    MOBILE

  • Mobile module: 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
  • SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
  • Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
  • SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
  • USSD: Supports sending and reading Unstructured Supplementary Service Data messages
  • Black/White list: Operator black/white list
  • Multiple PDN: Possibility to use different PDNs for multiple network access and services
  • Band management: Band lock, Used band status display
  • APN: Auto APN
  • Bridge: Direct connection (bridge) between mobile ISP and device on LAN
  • Passthrough: Router assigns its mobile WAN IP address to another device on LAN
  • WIRELESS

  • Wireless mode: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
  • WiFi security: WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
  • SSID/ESSID: SSID stealth mode and access control based on MAC address
  • WiFi users: Up to 100 simultaneous connections
  • Wireless Hotspot: Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
  • ETHERNET

  • WAN: 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
  • LAN: 3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
  • NETWORK

  • Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)
  • Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)
  • VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
  • Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
  • Firewall: Port forward, traffic rules, custom rules
  • DHCP: Static and dynamic IP allocation, DHCP Relay, Relayd
  • QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
  • DDNS: Supported >25 service providers, others can be configured manually
  • Network backup: WiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
  • Load balancing: Balance Internet traffic over multiple WAN connections
  • Hotspot: Internal/external Radius server, captive portal, built in customizable landing page
  • SSHFS: Possibility to mount remote file system via SSH protocol
  • SECURITY

  • Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
  • Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
  • Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
  • VLAN: Port and tag based VLAN separation
  • Mobile quota control: Custom data limits for both SIM cards
  • WEB filter: Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
  • Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter
  • VPN

  • OpenVPN: Multiple clients and a server can run simultaneously, 27 encryption methods
  • OpenVPN Encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
  • IPsec: IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
  • GRE: GRE tunnel, GRE tunnel over IPsec support
  • PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
  • Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
  • DMVPN: Method of building scalable IPsec VPNs
  • SSTP: SSTP client instance support
  • ZeroTier: ZeroTier VPN client support
  • WireGuard: WireGuard VPN client and server support
  • Tinc: Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.
  • MODBUS TCP SLAVE

  • ID range: Respond to one ID in range [1;255] or any
  • Allow Remote Access: Allow access through WAN
  • Custom registers: MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
  • MODBUS TCP MASTER

  • Supported functions: 01, 02, 03, 04, 05, 06, 15, 16
  • Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
  • MODBUS DATA TO SERVER

  • Protocol: HTTP(S), MQTT, Azure MQTT
  • MQTT GATEWAY

  • MQTT Gateway: Allows sending commands and receiving data from MODBUS Master through MQTT broker
  • DNP3

  • Supported modes: TCP Master, DNP3 Outstation
  • MONITORING & MANAGEMENT

  • WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
  • FOTA: Firmware update from server, automatic notification
  • SSH: SSH (v1, v2)
  • SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET
  • Call: Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/off
  • TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
  • MQTT: MQTT Broker, MQTT publisher
  • SNMP: SNMP (v1, v2, v3), SNMP Trap
  • JSON-RPC: Management API over HTTP/HTTPS
  • MODBUS: MODBUS TCP status/control
  • RMS: Teltonika Remote Management System (RMS)
  • IOT PLATFORMS

  • Cloud of Things: Allows monitoring of: Device data, Mobile data, Network info, Availability
  • ThingWorx: Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
  • Cumulocity: Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
  • Azure IoT Hub: Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type
  • FIRMWARE / CONFIGURATION

  • WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup
  • FOTA: Update FW
  • RMS: Update FW/configuration for multiple devices at once
  • Keep settings: Update FW without losing current configuration
  • FIRMWARE CUSTOMIZATION

  • Operating system: RutOS (OpenWrt based Linux OS)
  • Supported languages: Busybox shell, Lua, C, C++
  • Development tools: SDK package with build environment provided
  • INPUT / OUTPUT

  • Input: 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
  • Output: 1 x Digital Output, Open collector output, max output 30 V, 300 mA
  • Events: Email, RMS, SMS
  • I/O juggler: Allows to set certain I/O conditions to initiate event
  • POWER

  • Connector: 4-pin industrial DC power socket
  • Input voltage range: 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
  • PoE (passive): Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 - 50 VDC
  • Power consumption: < 2 W idle, < 7 W Max
  • PHYSICAL SPECIFICATION

  • Casing material: Aluminium housing, plastic panels
  • Dimensions (W x H x D): 110 x 50 x 100 mm
  • Weight: 287 g
  • Mounting options: DIN rail (can be mounted on two sides), flat surface placement
  • Ovenstående informationer/specifikationer er vejledende og kan uden varsel være ændret af producenten.
    Der tages forbehold for trykfejl og billederne er vejledende.
    Pris ved  1 stk. DKK

     

    Antal
    Køb
    Varenummer 205011250005
    Lagerstatus
    På lager 
    Forventet leveringstid 2-4 hverdage
    Link til producent: Teltonika IoT
    Teltonika RUT951 LTE Cat 4 Router Black

    RUT951

    INDUSTRIAL CELLULAR ROUTER

    RUT951 features dual-SIM cellular connectivity combined with Wi-Fi and four Ethernet interfaces to meet the needs of the most varied IoT scenarios. Powered by RutOS, this router offers advanced customization options, automation features, and top-level security for your solution.

    CONNECTIVITY

  • 4G LTE (Cat 4), 3G, 2G
  • DUAL SIM

  • With auto failover, backup WAN and other switching scenarios
  • WI-FI

  • Wireless Access Point with Hotspot functionality
  • WAN FAILOVER

  • Automatic switch to available backup connection


  • Specifikationer:

    MOBILE

  • Mobile module: 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
  • SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
  • Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
  • SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
  • USSD: Supports sending and reading Unstructured Supplementary Service Data messages
  • Black/White list: Operator black/white list
  • Multiple PDN: Possibility to use different PDNs for multiple network access and services
  • Band management: Band lock, Used band status display
  • APN: Auto APN
  • Bridge: Direct connection (bridge) between mobile ISP and device on LAN
  • Passthrough: Router assigns its mobile WAN IP address to another device on LAN
  • WIRELESS

  • Wireless mode: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
  • WiFi security: WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
  • SSID/ESSID: SSID stealth mode and access control based on MAC address
  • WiFi users: Up to 100 simultaneous connections
  • Wireless Hotspot: Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
  • ETHERNET

  • WAN: 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
  • LAN: 3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
  • NETWORK

  • Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)
  • Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)
  • VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
  • Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
  • Firewall: Port forward, traffic rules, custom rules
  • DHCP: Static and dynamic IP allocation, DHCP Relay, Relayd
  • QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
  • DDNS: Supported >25 service providers, others can be configured manually
  • Network backup: WiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
  • Load balancing: Balance Internet traffic over multiple WAN connections
  • Hotspot: Internal/external Radius server, captive portal, built in customizable landing page
  • SSHFS: Possibility to mount remote file system via SSH protocol
  • SECURITY

  • Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
  • Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
  • Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
  • VLAN: Port and tag based VLAN separation
  • Mobile quota control: Custom data limits for both SIM cards
  • WEB filter: Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
  • Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter
  • VPN

  • OpenVPN: Multiple clients and a server can run simultaneously, 27 encryption methods
  • OpenVPN Encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
  • IPsec: IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
  • GRE: GRE tunnel, GRE tunnel over IPsec support
  • PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
  • Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
  • DMVPN: Method of building scalable IPsec VPNs
  • SSTP: SSTP client instance support
  • ZeroTier: ZeroTier VPN client support
  • WireGuard: WireGuard VPN client and server support
  • Tinc: Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.
  • MODBUS TCP SLAVE

  • ID range: Respond to one ID in range [1;255] or any
  • Allow Remote Access: Allow access through WAN
  • Custom registers: MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
  • MODBUS TCP MASTER

  • Supported functions: 01, 02, 03, 04, 05, 06, 15, 16
  • Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
  • MODBUS DATA TO SERVER

  • Protocol: HTTP(S), MQTT, Azure MQTT
  • MQTT GATEWAY

  • MQTT Gateway: Allows sending commands and receiving data from MODBUS Master through MQTT broker
  • DNP3

  • Supported modes: TCP Master, DNP3 Outstation
  • MONITORING & MANAGEMENT

  • WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
  • FOTA: Firmware update from server, automatic notification
  • SSH: SSH (v1, v2)
  • SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET
  • Call: Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/off
  • TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
  • MQTT: MQTT Broker, MQTT publisher
  • SNMP: SNMP (v1, v2, v3), SNMP Trap
  • JSON-RPC: Management API over HTTP/HTTPS
  • MODBUS: MODBUS TCP status/control
  • RMS: Teltonika Remote Management System (RMS)
  • IOT PLATFORMS

  • Cloud of Things: Allows monitoring of: Device data, Mobile data, Network info, Availability
  • ThingWorx: Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
  • Cumulocity: Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
  • Azure IoT Hub: Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type
  • FIRMWARE / CONFIGURATION

  • WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup
  • FOTA: Update FW
  • RMS: Update FW/configuration for multiple devices at once
  • Keep settings: Update FW without losing current configuration
  • FIRMWARE CUSTOMIZATION

  • Operating system: RutOS (OpenWrt based Linux OS)
  • Supported languages: Busybox shell, Lua, C, C++
  • Development tools: SDK package with build environment provided
  • INPUT / OUTPUT

  • Input: 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
  • Output: 1 x Digital Output, Open collector output, max output 30 V, 300 mA
  • Events: Email, RMS, SMS
  • I/O juggler: Allows to set certain I/O conditions to initiate event
  • POWER

  • Connector: 4-pin industrial DC power socket
  • Input voltage range: 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
  • PoE (passive): Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 - 50 VDC
  • Power consumption: < 2 W idle, < 7 W Max
  • PHYSICAL SPECIFICATION

  • Casing material: Aluminium housing, plastic panels
  • Dimensions (W x H x D): 110 x 50 x 100 mm
  • Weight: 287 g
  • Mounting options: DIN rail (can be mounted on two sides), flat surface placement
  • Ovenstående informationer/specifikationer er vejledende og kan uden varsel være ændret af producenten.
    Der tages forbehold for trykfejl og billederne er vejledende.