Du bestemmer over dine data!

I samarbejde med vores samarbejdspartnere har vi teknologier, som f.eks. Cookies til at indsamle oplysninger, som giver dig en bedre oplevelse.

Vi indsamler forskellige oplysninger om dig til f.eks.:
1. Funktionalitet.
2. Statistik.
3. Markedsføring.

Desto mere viden vi får om dig desto bedre oplevelse kan vi give dig og de er selvfølgelig i sikre hænder hos os.

Du kan læse mere her

MikroTik RBwAP2nD - wAP RouterBOARD

MikroTik RBwAP2nD - wAP RouterBOARD
MikroTik RBwAP2nD - wAP RouterBOARD

MikroTik RBwAP2nD - wAP

wAP

The wAP (wall AP) is a small weatherproof wireless access point for your mobile devices, perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer.

The device has one 10/100 Ethernet port and can be mounted on a wall to provide basic internet access in any location. It looks unobtrusive and sleek, available in two colours - black (RBwAP2nD-BE) and white (RBwAP2nD).

It is waterproof and can be attached to any external wall from the inside of the case - so that it is not easy to detach from it’s mounting location. The bottom door can also be secured with a special screw, which can only be opened by the owner.

It is also possible to run the Ethernet cable directly behind the unit, to inside the wall, there is a special opening on the back of the case. This way, the unit doesn’t attract attention and blends into any environment.



Specifikationer:

Product specifications

  • CPU nominal frequency: 650 MHz
  • CPU core count: 1
  • Size of RAM: 64 MB
  • 10/100 Ethernet ports: 1
  • 10/100/1000 Ethernet ports: 0
  • MiniPCI slots: 0
  • MiniPCI-e slots: 0
  • Wireless chip model: QCA9533-BL3A
  • Wireless standards: 802.11b/g/n
  • Number of USB ports: 0
  • Power Jack: 1
  • PoE in: 802.3at
  • PoE out: No
  • Supported input voltage: 11 V - 57 V
  • Voltage Monitor: No
  • CPU temperature monitor: No
  • PCB temperature monitor: No
  • Operating temperature range: -40C to +70C
  • License level: 4
  • Antenna gain DBI: 2
  • Current Monitor: No
  • CPU: QCA9533-BL3A
  • Max Power consumption: 4W
  • SFP ports: 0
  • SFP+ ports: 0
  • Number of chains: 2
  • Serial port: None
  • Weight: 250g
  • Ovenstående informationer/specifikationer er vejledende og kan uden varsel være ændret af producenten.
    Der tages forbehold for trykfejl og billederne er vejledende.
    Pris ved  1 stk. DKK

     

    Antal
    Køb
    Varenummer 205041760019
    Lagerstatus
    Ikke på lager
    Klik her og få en mail når varen kommer på lager igen
     
    Forventet leveringstid Ubekræftet
    Link til producent: MikroTik
    MikroTik RBwAP2nD - wAP RouterBOARD

    MikroTik RBwAP2nD - wAP

    wAP

    The wAP (wall AP) is a small weatherproof wireless access point for your mobile devices, perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer.

    The device has one 10/100 Ethernet port and can be mounted on a wall to provide basic internet access in any location. It looks unobtrusive and sleek, available in two colours - black (RBwAP2nD-BE) and white (RBwAP2nD).

    It is waterproof and can be attached to any external wall from the inside of the case - so that it is not easy to detach from it’s mounting location. The bottom door can also be secured with a special screw, which can only be opened by the owner.

    It is also possible to run the Ethernet cable directly behind the unit, to inside the wall, there is a special opening on the back of the case. This way, the unit doesn’t attract attention and blends into any environment.



    Specifikationer:

    Product specifications

  • CPU nominal frequency: 650 MHz
  • CPU core count: 1
  • Size of RAM: 64 MB
  • 10/100 Ethernet ports: 1
  • 10/100/1000 Ethernet ports: 0
  • MiniPCI slots: 0
  • MiniPCI-e slots: 0
  • Wireless chip model: QCA9533-BL3A
  • Wireless standards: 802.11b/g/n
  • Number of USB ports: 0
  • Power Jack: 1
  • PoE in: 802.3at
  • PoE out: No
  • Supported input voltage: 11 V - 57 V
  • Voltage Monitor: No
  • CPU temperature monitor: No
  • PCB temperature monitor: No
  • Operating temperature range: -40C to +70C
  • License level: 4
  • Antenna gain DBI: 2
  • Current Monitor: No
  • CPU: QCA9533-BL3A
  • Max Power consumption: 4W
  • SFP ports: 0
  • SFP+ ports: 0
  • Number of chains: 2
  • Serial port: None
  • Weight: 250g
  • Ovenstående informationer/specifikationer er vejledende og kan uden varsel være ændret af producenten.
    Der tages forbehold for trykfejl og billederne er vejledende.