Du bestemmer over dine data!

I samarbejde med vores samarbejdspartnere har vi teknologier, som f.eks. Cookies til at indsamle oplysninger, som giver dig en bedre oplevelse.

Vi indsamler forskellige oplysninger om dig til f.eks.:
1. Funktionalitet.
2. Statistik.
3. Markedsføring.

Desto mere viden vi får om dig desto bedre oplevelse kan vi give dig og de er selvfølgelig i sikre hænder hos os.

Du kan læse mere her

IoT Teltonika 4G Cat 4 & WiFi Router Black Dual-SIM

IoT Teltonika 4G Cat 4 & WiFi Router Black Dual-SIM

IoT Teltonika 4G Cat 4 & WiFi Router Black Dual-SIM

RUT950 is a high-performance industrial 4G LTE Wi-Fi router designed as a Main/Backup internet source and guarantees a reliable internet connection with high data throughput and data redundancy. Compatible with the Teltonika Networks Remote Management System (RMS) for easy and secure monitoring. It has four Ethernet ports, two external SIM holders, digital I/O, and signal strength status LED indicators. Powered by RutOS - a unified operating system for all Teltonika Networks routers, this device is highly secure and customizable



Specifikationer:
  • Abonnementstype:

    MOBILE

  • Mobile module: 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
  • SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
  • Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
  • SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
  • Black/White list: Operator black/white list
  • Band management: Band lock, Used band status display
  • APN: Auto APN
  • Bridge: Direct connection (bridge) between mobile ISP and device on LAN
  • Passthrough: Router assigns its mobile WAN IP address to another device on LAN
  • Multiple PDN (optional): Possibility to use different PDNs for multiple network access and services (not available in standard FW)
  • WIRELESS

  • Wireless mode: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
  • WiFi security: WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
  • SSID: SSID stealth mode and access control based on MAC address
  • WiFi users: Up to 100 simultaneous connections
  • Wireless Hotspot: Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
  • ETHERNET

  • WAN: 1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
  • LAN: 3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
  • NETWORK

  • Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)
  • Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)
  • VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
  • Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
  • Firewall: Port forward, traffic rules, custom rules
  • DHCP: Static and dynamic IP allocation, DHCP Relay, Relayd
  • QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
  • DDNS: Supported >25 service providers, others can be configured manually
  • Network backup: VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover
  • Load balancing: Balance your internet traffic over multiple WAN connections
  • SSHFS (optional): Possibility to mount remote file system via SSH protocol (not available in standard FW)
  • SECURITY

  • Authentication: Pre-shared key, digital certificates, X.509 certificates
  • Firewall: Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
  • Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
  • VLAN: Port and tag based VLAN separation
  • Mobile quota control: Set up custom data limits for both SIM cards
  • WEB filter: Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
  • Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter
  • Secure Boot: Cryptographic integrity check of the each system boot process (available on device with special order code RUT950U072C0).
  • VPN

  • OpenVPN: Multiple clients and server can be running simultaneously, 12 encryption methods
  • OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
  • IPsec: IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
  • GRE: GRE tunnel
  • PPTP, L2TP: Client/Server services can run simultaneously
  • Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code
  • DMVPN: Method of building scalable IPsec VPNs
  • SSTP: SSTP client instance support
  • ZeroTier: ZeroTier VPN
  • WireGuard: WireGuard VPN client and server support
  • MODBUS

    MODBUS TCP SLAVE

  • ID range: Respond to one ID in range [1;255] or any
  • Allow Remote Access: Allow access through WAN
  • Custom registers: MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
  • MODBUS TCP MASTER

  • Supported functions: 01, 02, 03, 04, 05, 06, 15, 16
  • Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
  • MODBUS DATA TO SERVER

  • Protocol: HTTP(S), MQTT, Azure MQTT
  • MQTT GATEWAY

  • MQTT gateway: Allows sending commands and receiving data from MODBUS Master through MQTT broker
  • DNP3

  • Supported modes: TCP Master, DNP3 Outstation
  • MONITORING & MANAGEMENT

  • WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
  • FOTA: Firmware update from server, automatic notification
  • SSH: SSH (v1, v2)
  • SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET
  • Call: Reboot, Status, WiFi on/off, Mobile data on/off, Output on/off
  • TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
  • MQTT: MQTT Broker, MQTT publisher
  • SNMP: SNMP (v1, v2, v3), SNMP trap
  • JSON-RPC: Management API over HTTP/HTTPS
  • MODBUS: MODBUS TCP status/control
  • RMS: Teltonika Remote Management System (RMS)
  • IoT PLATFORMS

  • Cloud of Things: Allows monitoring of: Device data, Mobile data, Network info, Availability
  • SYSTEM CHARACTERISTICS

  • CPU: Atheros Wasp, MIPS 74Kc, 550 MHz
  • RAM: 128 MB, DDR2
  • FLASH storage: 16 MB, SPI Flash
  • INPUT/OUTPUT

  • Input: 1 x Digital input, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high
  • Output: 1 x Digital open collector output, max output 30 V, 300 mA
  • Events: SMS, EMAIL, RMS
  • PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)

  • Ethernet: 4 x RJ45 ports, 10/100 Mbps
  • I/O’s: 1 x Digital Input, 1 x Digital Output on 4 pin power connector (available from HW revision 1600)
  • Status LEDs: 1 x bi-color connection status LED, 5 x connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED
  • SIM: 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)
  • Power: 1 x 4 pin power connector
  • Antennas: 2 x SMA for LTE, 2 x RP-SMA for WiFi antenna connectors
  • Reset: Reboot/User default reset/Factory reset button
  • PHYSICAL SPECIFICATION

  • Casing material: Aluminium housing, plastic panels
  • Dimensions (W x H x D): 110 x 50 x 100 mm
  • Weight: 280 g
  • Mounting options: DIN rail (can be mounted on two sides), flat surface placement
  • Ovenstående informationer/specifikationer er vejledende og kan uden varsel være ændret af producenten.
    Der tages forbehold for trykfejl og billederne er vejledende.
    Pris ved  1 stk. DKK

     

    Antal
    Køb
    Varenummer 205011250002
    Lagerstatus
    Ikke på lager
    Klik her og få en mail når varen kommer på lager igen
     
    Forventet leveringstid Ubekræftet
    Link til producent: Teltonika IoT
    Funktioner:
  • CONNECTIVITY: 4G/LTE (Cat 4),3G,2G
  • WAN FAILOVER: Automatic switch to available backup connection
  • WIFI: Wireless Access Point with Hotspot functionality
  • DUAL SIM: With auto failover
  • backup WAN and other switching scenarios
  • ETHERNET: 4x Ethernet interfaces with VLAN functionality
  • RMS: Compatible with Teltonika Remote Management System
  • IoT Teltonika 4G Cat 4 & WiFi Router Black Dual-SIM

    RUT950 is a high-performance industrial 4G LTE Wi-Fi router designed as a Main/Backup internet source and guarantees a reliable internet connection with high data throughput and data redundancy. Compatible with the Teltonika Networks Remote Management System (RMS) for easy and secure monitoring. It has four Ethernet ports, two external SIM holders, digital I/O, and signal strength status LED indicators. Powered by RutOS - a unified operating system for all Teltonika Networks routers, this device is highly secure and customizable



    Specifikationer:
  • Abonnementstype:

    MOBILE

  • Mobile module: 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
  • SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
  • Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
  • SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
  • Black/White list: Operator black/white list
  • Band management: Band lock, Used band status display
  • APN: Auto APN
  • Bridge: Direct connection (bridge) between mobile ISP and device on LAN
  • Passthrough: Router assigns its mobile WAN IP address to another device on LAN
  • Multiple PDN (optional): Possibility to use different PDNs for multiple network access and services (not available in standard FW)
  • WIRELESS

  • Wireless mode: IEEE 802.11b/g/n, Access Point (AP), Station (STA)
  • WiFi security: WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
  • SSID: SSID stealth mode and access control based on MAC address
  • WiFi users: Up to 100 simultaneous connections
  • Wireless Hotspot: Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
  • ETHERNET

  • WAN: 1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
  • LAN: 3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
  • NETWORK

  • Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)
  • Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)
  • VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
  • Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
  • Firewall: Port forward, traffic rules, custom rules
  • DHCP: Static and dynamic IP allocation, DHCP Relay, Relayd
  • QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
  • DDNS: Supported >25 service providers, others can be configured manually
  • Network backup: VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover
  • Load balancing: Balance your internet traffic over multiple WAN connections
  • SSHFS (optional): Possibility to mount remote file system via SSH protocol (not available in standard FW)
  • SECURITY

  • Authentication: Pre-shared key, digital certificates, X.509 certificates
  • Firewall: Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
  • Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
  • VLAN: Port and tag based VLAN separation
  • Mobile quota control: Set up custom data limits for both SIM cards
  • WEB filter: Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
  • Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter
  • Secure Boot: Cryptographic integrity check of the each system boot process (available on device with special order code RUT950U072C0).
  • VPN

  • OpenVPN: Multiple clients and server can be running simultaneously, 12 encryption methods
  • OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
  • IPsec: IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
  • GRE: GRE tunnel
  • PPTP, L2TP: Client/Server services can run simultaneously
  • Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code
  • DMVPN: Method of building scalable IPsec VPNs
  • SSTP: SSTP client instance support
  • ZeroTier: ZeroTier VPN
  • WireGuard: WireGuard VPN client and server support
  • MODBUS

    MODBUS TCP SLAVE

  • ID range: Respond to one ID in range [1;255] or any
  • Allow Remote Access: Allow access through WAN
  • Custom registers: MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
  • MODBUS TCP MASTER

  • Supported functions: 01, 02, 03, 04, 05, 06, 15, 16
  • Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
  • MODBUS DATA TO SERVER

  • Protocol: HTTP(S), MQTT, Azure MQTT
  • MQTT GATEWAY

  • MQTT gateway: Allows sending commands and receiving data from MODBUS Master through MQTT broker
  • DNP3

  • Supported modes: TCP Master, DNP3 Outstation
  • MONITORING & MANAGEMENT

  • WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
  • FOTA: Firmware update from server, automatic notification
  • SSH: SSH (v1, v2)
  • SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET
  • Call: Reboot, Status, WiFi on/off, Mobile data on/off, Output on/off
  • TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
  • MQTT: MQTT Broker, MQTT publisher
  • SNMP: SNMP (v1, v2, v3), SNMP trap
  • JSON-RPC: Management API over HTTP/HTTPS
  • MODBUS: MODBUS TCP status/control
  • RMS: Teltonika Remote Management System (RMS)
  • IoT PLATFORMS

  • Cloud of Things: Allows monitoring of: Device data, Mobile data, Network info, Availability
  • SYSTEM CHARACTERISTICS

  • CPU: Atheros Wasp, MIPS 74Kc, 550 MHz
  • RAM: 128 MB, DDR2
  • FLASH storage: 16 MB, SPI Flash
  • INPUT/OUTPUT

  • Input: 1 x Digital input, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high
  • Output: 1 x Digital open collector output, max output 30 V, 300 mA
  • Events: SMS, EMAIL, RMS
  • PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)

  • Ethernet: 4 x RJ45 ports, 10/100 Mbps
  • I/O’s: 1 x Digital Input, 1 x Digital Output on 4 pin power connector (available from HW revision 1600)
  • Status LEDs: 1 x bi-color connection status LED, 5 x connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED
  • SIM: 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)
  • Power: 1 x 4 pin power connector
  • Antennas: 2 x SMA for LTE, 2 x RP-SMA for WiFi antenna connectors
  • Reset: Reboot/User default reset/Factory reset button
  • PHYSICAL SPECIFICATION

  • Casing material: Aluminium housing, plastic panels
  • Dimensions (W x H x D): 110 x 50 x 100 mm
  • Weight: 280 g
  • Mounting options: DIN rail (can be mounted on two sides), flat surface placement
  • Ovenstående informationer/specifikationer er vejledende og kan uden varsel være ændret af producenten.
    Der tages forbehold for trykfejl og billederne er vejledende.